mosh:protocol:op_codes:system_op_codes
This is an old revision of the document!
Core Operation Codes
| Value | Name | Description |
|---|---|---|
| 0x01 | CORE_HELLO | Announce presence on the network. |
| 0x02 | CORE_DISCOVER | Request nodes to identify themselves. |
| 0x03 | CORE_GOODBYE | Graceful node departure. |
| 0x04 | CORE_PING | Check reachability / latency. |
| 0x05 | CORE_PONG | Response to CORE_PING |
| 0x05 | CORE_SET_NAME | Set the nodes friendly name |
| 0x06 | CORE_TIME_SYNC | Synchronize clocks across nodes. |
| 0x07 | CORE_STATE_REQUEST | Sender is requesting the system state |
| 0x08 | CORE_STATE_RESP | Frame contains the system state |
| 0x09 | CORE_TRANSPORTS_REQUEST | Sender is requesting the available transports |
| 0x0A | CORE_TRANSPORTS_RESPONSE | Frame contains a list of transports |
| 0x0B | CORE_TRANSPORT_CONFIGURE | Frame contains transport configuration information |
| 0x0C | CORE_TRANSPORT_CONF_ACK | Configuration change acknowledgement (ok) |
| 0x0D | CORE_TRANSPORT_CONF_ERR | Configuration change error |
| 0x0E | CORE_ROUTE_REQUEST | Request routes from remote core |
| 0x0F | CORE_ROUTE_RESPONSE | Contains the route available |
/var/www/wiki.moshnetworks.com/data/attic/mosh/protocol/op_codes/system_op_codes.1778797372.txt.gz · Last modified: by mosh